Descripción
SPEC P-046 / C-046 / P-046e / C-246
|
Blade
|
Deoxidized Phosphor Bronze (Buff Surface)
|
|---|---|
|
Plating
|
24K Gold (1.5 Micron) + Palladium (0.3 Micron)
|
|
Install cable O.D.
|
min 6.5mm max 17.0mm
|
|
Maximam wire gauge
|
AWG10(5.5sq)
|
|
Rated V/A
|
P-046 : 125V・15A <PS>E
C-46 : 125V / 15A, 250V / 16A <PS>E, CE
P-046e : 250V / 16A CE
|
Materials
■ Contacts
The basic material is deoxidized phosphor bronze (1.4mm thick) for strength and secure contact. When connected, they can take over 7kg load. Surface is thoroughly polished twice.
■ Plating
The manufacturing process is started from foundation coating. The material which was punched out as a part is polished by hand piece by piece after machined barrel-polishing.
The plating of the P-046/C-046 is a combination of 24k gold and palladium which were selected as a result of repeated listening tests. The inner gold layer is 1.5 microns thick and the outer palladium layer is 0.3 microns thick.
Body
■ Body
30% glass filled PBT has excellent machine-ability and provides superior electrical isolation. The highly rigid body of the P-046/C-046 effectively attenuates high-speed vibrations. All screws, which were originally designed for P/C series, are made of highly rigid stainless steel which is non-magnetic substance. Moreover, the cable cannot be separated from the plug by a force less than 30kg, a significant safety feature.
■ Stainless screws
The screws of P/C series are all made of highly rigid stainless so its screw head doesn’t collapse even if you give them too much strength. In addition, because it is non-magnetic material, it helps to achieve hign S/N ratio without being magnetized at its conection part.
■ Outer cover
The outer cover of P/C series is made of PC(PolyCarbonate) for its rigidity and hardness. It helps to attenuate tiny vibrations in quick response and reduce distortions by its superior mechanical strength.
